| Model No. | PCB-A5 |
| Transport package | Vacuum Packing |
| Certification | UL,ISO9001&ISO14001,RoHS |
| Definitions | IPC Class2 |
| Minimum Space/Line | 0.075mm/3mil |
| Impedance control | 50±10% |
| Production Capacity | 720, 000 M2/Year |
| Origin | Made in China |
Rigid-flexible printed circuits boards overview
The literal meaning of "rigid-flex" is combination the advantages of both flexible and rigid boards. It's seen as two-in-one circuit is interconnected through plated thru holes. Rigid flex circuits enable higher component density while fitting into limited and odd shaped spaces.
Rigid-flex printed circuits boards consists of multiple flexible circuit inner layers selectively attached together using an epoxy pre-preg bonding film, similar to a multilayer flexible circuit. Rigid flex circuits have been used in the military and aerospace industries for more than 20 years. In most rigid flex circuit boards.
|
Item |
Spec. |
|
Layers |
1~8 |
|
Board Thickness |
0.1mm-8.0mm |
|
Material |
Polymide, PET, PEN, FR4
|
|
Max Panel Size |
600mm×1200mm |
|
Min Hole Size |
0.1mm |
|
Min Line Width/Space |
3mil(0.075mm) |
|
Board Outline Tolerance |
士0.10mm |
|
Insulation Layer Thickness |
0.075mm--5.00mm |
|
Final Thickness |
0.0024''-0.16'' (0.06-2.4.00mm) |
|
Drilling Hole (Mechanical) |
17um--175um |
|
Finish Hole (Mechanical) |
0.10mm--6.30mm |
|
Diameter Tolerance (Mechanical) |
0.05mm |
|
Registration (Mechanical) |
0.075mm |
|
Aspect Ratio |
16:1 |
|
Solder Mask Type |
LPI |
|
SMT Mini. Solder Mask Width |
0.075mm |
|
Mini. Solder Mask Clearance |
0.05mm |
|
Plug Hole Diameter |
0.25mm--0.60mm |
|
Impedance Control Tolerance |
士10% |
|
Surface finish |
ENIG, Chem. Tin/Sn, Flash Gold |
|
Solder mask |
Green/Yellow/Black/White/Red/Blue |
|
Silkscreen |
Red/Yellow/Black/White |
|
Certificate |
UL, ISO 9001, ISO14001, IATF16949 |
|
Special Request |
Blind hole, Gold finger, BGA, Carbon ink, peekable mask, VIP process, Edge plating, Half holes |
|
Material Suppliers |
Shengyi, ITEQ, Taiyo, etc. |
|
Common Package |
Vacuum+Carton |
The capability to shape the final assembly of rigid and flexible PCBs to fit a product enclosure is the primary advantage of flexible circuits boards. Here are 2 tips to incorporate in your rigid-flex design project:
Increase trace reliability: The bending that flex circuits endure means that the copper is more likely to delaminate than on a rigid board. The addition of copper to the substrate is less than on an FR4 PCB as well.
Strengthen traces and vias with teardrops: If not controlled, bending the substrate can lead to delamination and product failure. Traces and vias can, however, be strengthened to prevent delamination, also produce better yield in manufacturing by giving more drilling tolerance.
|
Small Batch Volume ≤1 sq meter |
Working Days |
Mass Production |
Working Days |
|
Single-Sided |
3-4 |
Single-Sided |
8-10 |
|
2-4 layers |
4-5 |
2-4 layers |
10-12 |
|
6-8 layers |
10-12 |
6-8 layers |
14-18 |
The pass rate of incoming material above 99.9%. The number of mass rejection rates below 0.01%.
One-year warranty. if any quality problems, not caused by improper use or man-made, ABIS will replace it one by one.
ABIS certified facilities control all key processes to eliminate all potential issues before producing.
ABIS utilizes advanced software to perform extensive DFM analysis on incoming data, and uses advanced quality control systems throughout the manufacturing process.
ABIS performs 100% visual and AOI inspection as well as performing electrical testing, High Voltage testing, impedance control testing, micro-sectioning, thermal shock testing, solder testing, reliability testing, insulating resistance testing and ionic cleanliness testing.
Each Customer will have a sale to contact you. Our working hours: AM 9:00-PM 19:00(Beijing Time) from Monday to Friday. We will reply to your email as soon as quickly during our working time. And you also could contact our sales by cellphone if urgent.
3.What board manufacturer do you use for FR4?Main Suppliers(FR4): Kingboard (Hong Kong), NanYa (Taiwan), and Shengyi (China), If others, please RFQ.
4.How do you test and control the quality?Our Quality Assuring Procedures as below:
a),Visual Inspection
b),Flying probe, fixture tool
c), Impedance control
d), Solder-ability detection
e), Digital metallograghic microscope
f),AOI (Automated Optical Inspection)
5.How many days will the sample be finished? And how about mass production?Generally 2-3 days for sample making. The lead time of mass production will depend on the order quantity and the season you place the order.
6.How do you test and control the quality?Our Quality Assuring Procedures as below:
a),Visual Inspection
b),Flying probe, fixture tool
c), Impedance control
d), Solder-ability detection
e), Digital metallograghic microscope
f),AOI (Automated Optical Inspection)
7.What certifications do you have?ISO9001, ISO14001,UL USA& USA Canada,IFA16949, SGS, RoHS report.
8.What kinds of testing do you have?ABlS performs 100% visual and AOl inspection as well as performing electrical testing, high voltage testing, impedance control testing, micro-sectioning, thermal shock testing, solder testing, reliability testing, insulating resistance testing, ionic cleanliness testing and PCBA Functional testing.
9.If I order a big quantity, what's the good price?Please send the details inquiry to us, such as the Item Number, Quantity for each item, Quality request, Logo, Payment Terms, Transport method, Discharge place, etc. We will make an accurate quotation for you as soon as possible.
10.How about your Quick Turn Service?On time delivery rate is more than 95%
a),24 hours fast turn for double side prototype PCB
b),48hours for 4-8 layers prototype PCB
c),1 hour for quotation
d),2 hours for engineer question/Complaint feedback
e),7-24 hours for technical support/order service/manufacturing operations